Inverter Power Supply Board - Xerox Paser 7400 Service Manual

Inverter Power Supply Board

1.
Remove the Inverter and base unit from the Finisher (page 5-5).
2.
Remove the Inverter Rear Covers (page 5-19).
3. Remove the Inverter Controller Board (page 5-55).
4. Disconnect all cables.
Replacement Note
It is a good idea to label all connectors to make sure that you replace each
one in its proper plug during reassembly.
5. Remove three screws (metal flange, 6 mm) securing the board to the chassis.
6.
Pull the board out of the chassis slots to remove the board.
5-56 Phaser 7400 Color Printer Options Service Manual
Inverter Power Supply Board
s7400-500