Finisher Punch Transfer Motor - Xerox Paser 7400 Service Manual

Finisher Punch Transfer Motor

1.
Remove the Rear Cover (page 5-11).
2.
Remove the Front Door (page 5-8).
3. Remove the Upper Cover (page 5-13).
4. Disconnect connector to the motor.
5. Remove the harness from the harness guide.
6.
To remove the Finisher Punch Transfer Motor from the Punch Unit, remove the
two metal screws (metal flange, 6 mm) securing the motor to the chassis and lift
out.
Finisher Punch Transfer Motor
5-58 Phaser 7400 Color Printer Options Service Manual
Connector
Harness Guide
s7400-255