Units
Punch Unit
The steps in this procedure show you how to remove the Punch Unit.
Boss Hole
Boss
Screw
Punch Module
Screw (With Rosette) (Supplied With This Module)
1.
Remove the Paper Exit Tray (page 5-7).
2.
Remove the Front Door (page 5-8).
3.
Remove the Rear Cover (page 5-11).
4.
Remove the Waste Case Box.
5.
Remove the two screws (metal, 6 mm) securing the top cover of the punch unit.
5-24
Screw
Phaser 7400 Color Printer Options Service Manual
Boss Hole
Boss
s7400-103