Shift Limit Sensors - Xerox Paser 7400 Service Manual

Shift Limit Sensors

The Shift (Upper and Lower) Limit Sensors detect the upper and lower limits of the
delivery tray stack. To remove and replace either of the sensors:
1. Remove the Paper Exit Tray (page 5-7).
2. Remove the Rear Cover (page 5-11).
3.
Remove the Upper Cover (page 5-13).
4.
Remove the Side Guide (page 5-107).
5.
Refer to the illustration below to locate either sensor.
6.
To remove either sensor, first remove the 4-wire connector (CN49 Lower, and
CN50 Upper) from the sensor. Pinch the plastic tabs to pull the sensor free.
Service Parts Disassembly
Shift Limit Sensor Upper
Shift Lower Limit Sensor
Bind Tray Sensor
s7400-704
5-79