Paddle Home Position Sensor - Xerox Paser 7400 Service Manual

Paddle Home Position Sensor

The Paddle Home Position Sensor detects when it is necessary to drive the paddle and
feed the next sheet of paper. To remove the sensor.
1. Remove the Paper Exit Tray (page 5-7).
2. Remove the Rear Cover (page 5-11).
3.
Locate the sensor (see illustration) and disconnect connector CN39.
Paddle Home Position Sensor
4.
To remove the sensor, pinch the plastic tabs with needle nose pliers, and then pull
the sensor free.
Service Parts Disassembly
CN39
s7400-665
5-91