Bind Tray Sensor
The Bind Tray Sensor detects when paper is present in the Saddle Unit's bind tray. To
remove and replace the sensor:
1.
Remove the Paper Exit Tray (page 5-7).
2.
Remove the Front Door (page 5-8).
3.
Remove the Rear Cover (page 5-11).
4.
Remove the Upper Cover (page 5-13).
5.
Remove the Side Guide (page 5-107).
6.
Remove the Bind Tray Sensor Cover (see illustration).
Bind Tray Sensor Cover Plate
7.
To remove the Bind Tray Sensor, first remove the 4-wire connector CN47 from
the sensor, and then pinch the plastic tabs to pull the sensor free.
5-98
Phaser 7400 Color Printer Options Service Manual
Bind Tray Sensor
s7400-6