Xerox Paser 7400 Service Manual page 384

Inverter Controller Board Plug/Jack Designator
P/J Map Coord
SNSCN0 3
SNSCN1 3
SNSCN2 3
CL1 3
CL2 3
FAN 3
MOTOR-A 3
MOTOR-B 3
MAIN1 3
MAIN2 3
FLASH 3
POWER 3
Duplex Unit Controller Board Plug/Jack Designator
P/J Map Coord
SNSCN0 4
SNSCN1 4
SNSCN2 4
CL1 4
CL2 4
FAN 4
MOTOR-A 4
MOTOR-B 4
MAIN1 4
MAIN2 4
FLASH 4
POWER 4
7-4
Remarks
F-837 Connects to paper sensors.
E-837 Connects to Inverter Docking Sensor.
E-837 Connects to Door Open Interlock Switch (Door F).
F-836 Connects to Lower Roller Solenoid.
C-836 Connects to Paper Diverter Solenoid.
D-836 Connects to diverter clutch.
C-837 Connects to the Upper Feed Motor.
A-837 Connects to the Lower Feed Motor.
J-837 Connects to connector supplying Finisher Controller Board
signals.
E-839 Connects to power supply from the Finisher.
H-836 Connect to external equipment for FLASH memory.
A-836 Connects to the Power Supply Board.
Remarks
F-837 Connects to the Front and Rear Paper Sensor.
E-837 Connects to the Entrance Sensor and the Reverse Sensor.
E-837 No connection.
F-836 Connects to the Paper Diverter Solenoid.
C-836 No connection.
D-836 Connects to the fan.
C-837 Connects to the Roller Motor.
A-837 Connects to the Reverse Roller Motor.
J-837 Connects to connector supplying signals from the Finisher,
including power.
E-839 No connection.
H-836 Connect to external equipment for FLASH memory.
A-836 No connection.
Phaser 7400 Color Printer Options Service Manual