Processing Tray Sensor
The Processing Tray Sensor detects the processing stack within the delivery path. To
remove and replace the Processing Tray Sensor:
1.
Remove the Paper Exit Tray (page 5-7).
2.
Remove the Front Door (page 5-8).
3.
Remove the Rear Cover (page 5-11).
4.
Remove the Upper Cover (page 5-13).
5.
Remove the Side Guide (page 5-107).
6.
Refer to the illustration to locate the sensor.
7.
To remove the sensor, first remove the 4-wire connector CN29 from the sensor.
Pinch the plastic tabs to pull one side of the sensor free.
5-82
Delivery Belt
Home Position Sensor
Paper Surface Sensor
Phaser 7400 Color Printer Options Service Manual
Tray Paper Sensor
Processing Tray Sensor
s7400-705