Show Interfaces Status - Edge-Core ECS4510-28P User Manual

This command displays the status for an interface.
show interfaces
status
S
YNTAX
D
EFAULT
Shows the status for all interfaces.
C
OMMAND
Normal Exec, Privileged Exec
C
OMMAND
If no interface is specified, information on all interfaces is displayed. For a
description of the items displayed by this command, see
Connection Status" on page
E
XAMPLE
Console#show interfaces status ethernet 1/1
Information of Eth 1/1
Basic Information:
Configuration:
Current Status:
Console#
show interfaces status [interface]
interface
ethernet unit/port
unit - Unit identifier. (Range: 1)
port - Port number. (Range: 1-28/52)
port-channel channel-id (Range: 1-16)
vlan vlan-id (Range: 1-4093)
S
ETTING
M
ODE
U
SAGE
Port Type : 1000BASE-T
MAC Address : 00-E0-0C-00-00-FE
Name :
Port Admin : Up
Speed-duplex : Auto
Capabilities : 10half, 10full, 100half, 100full
Broadcast Storm : Enabled
Broadcast Storm Limit : 64 Kbits/second
Multicast Storm : Disabled
Multicast Storm Limit : 64 Kbits/second
Unknown Unicast Storm
Unknown Unicast Storm Limit : 64 Kbits/second
Flow Control : Disabled
VLAN Trunking : Disabled
LACP : Disabled
Media Type : None
Link Status : Up
Port Operation Status : Up
Operation Speed-duplex : 100full
Up Time : 0w 0d 1h 11m 2s (4262 seconds)
Flow Control Type : None
Max Frame Size : 1518 bytes (1522 bytes for tagged frames)
MAC Learning Status : Enabled
– 983 –
C 29
HAPTER
155.
: Disabled
| Interface Commands
Interface Configuration
"Displaying