Intended Use; Indications For Use; Indications; Contraindications - Otto Bock Centro S1 Instructions For Use Manual

Table of Contents

Advertisement

3 Intended use

The safe use of the product can only be ensured in case of intended use in accordance with the information con­
tained in these instructions for use. The user is ultimately responsible for accident-free operation.

3.1 Indications for use

The wheelchair is intended for everyday indoor and outdoor use, by the user or an attendant, of people with tem­
porary or permanent limitations of the ability to walk, inability to walk or difficulty standing up.
The product is suitable for users with intact skin whose anatomy (such as body dimensions and weight) permits the
intended use of the product.
The wheelchair may only be used with the options listed on the product order form.
Ottobock assumes no liability for combinations with medical devices and/or accessories from other manufacturers
outside the modular system.
Combinations based on a combination agreement that have been evaluated for effectiveness and safety are an
exception to this.

3.2 Indications

Minor to pronounced or complete restrictions of mobility

3.3 Contraindications

3.3.1 Absolute Contraindications

None known

3.3.2 Relative Contraindications

Failure to meet physical or mental requirements

3.4 Qualification

Installation and adjustment tasks may only be carried out by qualified personnel. Compliance with all manufacturer
specifications and all applicable legal provisions is required. Please contact the manufacturer's service department
for further information (see inside or outside of rear cover for addresses).

4 Safety

4.1 Explanation of warning symbols

Warning regarding possible serious risks of accident or injury.
WARNING
Warning regarding possible risks of accident or injury.
CAUTION
Warning regarding possible technical damage.
NOTICE

4.2 Safety instructions for assembly and adjustments

WARNING
Making incorrect adjustments
Risk of falling, tipping over or malposition of the user due to incorrect settings
► Settings may only be changed by qualified personnel unless otherwise prescribed.
► Before testing setting changes with the user seated, all screw connections must be firmly tightened.
► Check the product for safety and functionality after changing the settings.

4.3 Safety instructions for use

Hazards during preparation for use
WARNING
Independent modification of settings
Serious injuries to the user due to improper changes to the product
► Do not modify the settings established by the qualified personnel. Only the settings described in the section
"Use" in these instructions for use may be adjusted independently.
► In case of problems with the settings, please contact the qualified personnel who adjusted your product.
Centro S1
Intended use
7

Advertisement

Table of Contents
loading

Table of Contents