Resetting The Z-Axis Coordinate - Nikon Eclipse Ni-E Instruction Manual

Position exchange of the fine focus knob
The fine focus knobs, located on both sides of the main body,
are flat on one end, and convex on the other. The fine focus
knob on each side is attached with a magnet, and can easily be
swapped.
Position them to best suit your usage.
Removing a flat focus knob
The flat fine focus knob can be easily removed by
inserting a hex driver (2 mm across flats) into the notch in
the knob.

Resetting the Z-axis Coordinate

4.3
The Z-axis coordinate can be reset to zero and used as the
reference point for adjusting the focus. To do so, adjust the
focus on the sample, then press the Z-RESET button. The
Z-axis coordinate value will be reset to 0.000 um.
Operation on DS-L3 (See "20.2 Microscope Control".)
Chapter 3
Individual Operations
52
A . S
Convex fine focus knob
Position exchange of the focus knob
[Z-RESET] Button used to reset the Z-axis
coordinate
P A _ _ 2 x _ _ _ _ Z : _ _ _ _ _
U V - 2 B C _ Z M : 1 0 x
' '
Flat fine focus knob
0 . 0 0 0 u m
_ N D : _ 0 . 0 %