Nikon Eclipse Ni-E Instruction Manual page 106

■ Enabling operation button
→(See DS-L3 Chapter 6 "4.2.5 Enabling/Disabling the Button Operation".)
Enable/disable the buttons located on the front and lateral right/left on the base of the Ni-E microscope.
The buttons can only be configured as a group (front, lateral left, lateral right) not individually.
<Factory setting>
All "enabled"
(3-2) Operation Buttons on Ergo Controller
(See DS-L3 Chapter 6 "4.3 Configuring the Function of the Ergo Controller Buttons".)
Change the function of buttons equipped with the ergo controller.
See the Ni-E (Focusing Stage System) instruction manual for details of the ergo controller.
(3-3) Buttons on the Screens on DS-L3
(See DS-L3 Chapter 6 "4.1 Configuring the Screen Buttons for DS-L3".)
Configure the buttons on DS-L3 screens.
■ Function Setting on the [MICROSCOPE CONTROL」/[CAM-MIC CONTROL] Screen
(See DS-L3 Chapter 6 "4.1.1 Selecting the Buttons to be Displayed".)
Up to 15 buttons can be aligned on the [MICROSCOPE CONTROL] screen and up to 12 on the [CAM-MIC CONTROL]
screen.
<Factory setting>
For information on [MICROSCOPE CONTROL] screen, see
DS-L3 Chapter 2 "3.1 MICROSCOPE CONTROL Screen
(Ni-E)".
For information on [CAM-MIC CONTROL] screen, see DS-L3
Chapter 2 "3.2 CAM-MIC CONTROL Screen (Ni-E)".
Chapter 3
Individual Operations
92
Enabling/Disabling Ni-E buttons
DS-L3 [MICROSCOPE CONTROL] screen control
button configuration
(Example of specifying Epi-fluorescence cube
turret → Filter cube)