Nikon Eclipse Ni-E Instruction Manual page 39

Viewing the sample
20
Attach the DIC slider (objective side) to the slider nosepiece.
Turn the objective vertical movement lever
counterclockwise to lower the objective. You can see the
DIC slider insertion slot for the rear objective. Insert the
DIC slider into the slot. (If the front objective is in the
optical path, turn the objective vertical movement lever
clockwise to lower the objective. You can see the DIC
slider insertion slot.).
Choose the DIC slider appropriate for the intended
microscopy purpose and the objective used.
(See Chapter 3, "16 Differential Interference Contrast
Microscopy - 16.2 Using Optical Elements".)
21
Bring the DIC module (condenser side) into the optical path.
Turn the condenser turret to bring the DIC module suited
for the objective into the optical path.
Choose the DIC module appropriate for the intended
microscopy purpose and the objective used.
(See Chapter 3, "16 Differential Interference Contrast
Microscopy - 16.2 Using Optical Elements".)
Chapter 2
Microscopy Operations
IR-DIC Microscopy Preparation
Procedure
1 2 3 4 5 6
Focus and Orientation Microscopy
7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 ■
FN -S2 JAPA N
N
Attaching the DIC slider on the objective
Display of DIC
module
in optical path
Example: [N1]
Bringing the DIC module on the condenser into the
25
10x 40x
DIC slider
optical path