Left Operation Button - Nikon Eclipse Ni-E Instruction Manual

Left Operation Button

2.3
No. Name
*
25 OBJ CW button
*
26 OBJ CCW button
27 Escape button
28 Dia-illumination
brightness control knob
29 Dia-illumination
ON/OFF switch
Changing the function of an operation button
For buttons with * appended in the table; [FUNCTION] button, [FL CUBE CW/CCW] button, [OBJ CW/CCW] button, [FL
SHUTTER] button and [CAPTURE] button, their functions can be changed. (See "20 Operation on DS-L3" - "20.1
Setting Up the Microscope - (3) Configuring the Button Functions" for details.)
Enabling/disabling the operation button
You can "disable" the operation button. The buttons can only be configured as a group (front, right, left), and not
individually. (See "20 Operation on DS-L3" - "20.1 Setting Up the Microscope - (3) Configuring the Button Functions" for
details.)
Chapter 3
Individual Operations
25
26
Left Operation Button
Rotate the motorized nosepiece by one address clockwise (as viewed from above).
(The motorized nosepiece is not used in the focusing nosepiece. Change the
function of the button to a different operation.)
Rotate the motorized nosepiece by one address counterclockwise (as viewed from
above). (The motorized nosepiece is not used in the focusing nosepiece. Change the
function of the button to a different operation.)
Used for refocusing operation. Pressing the switch raises the objective to the preset
position. Press the switch again to restore the objective to the original position. (See
"4.4 Refocusing".)
Adjust the brightness of the dia-illumination lamp by changing the supplied voltage.
Turn the dia-illumination lamp on or off.
47
29
27 28
Function