Operation On Ds-L3; Setting Up The Microscope - Nikon Eclipse Ni-E Instruction Manual

20

Operation on DS-L3

Setting Up the Microscope

20.1
If you use the microscope as it is set up as default, a specific setup is not required, however, if you want to change the
setting to meet your needs, you want to use useful functions, or you want to set the information on optical elements, use
DS-L3 for the operation below. References are provided so that the instruction manual bundled with DS-L3 "Microscope
Operation" for detailed explanation can be used. In addition, to restore all settings to the default setting, see (7)
Maintenance " Restoring the factory default settings for microscope data (from the microscope) ".
Display the [MICROSCOPE CONTROL] top
1
screen.
Turning ON the DS-L3 displays the top screen of the
camera control at first.
Use the [▼] button to navigate to the MICROSCOPE
CONTROL top screen.
2
Display the [MICROSCOPE SETUP MENU] screen.
3
Select a setup menu.
Press your desired menu button on the [MICROSCOPE
SETUP MENU] screen.
[COMPONENTS] → (1) Setting Optical Elements
[CONNECTION] → (2) Configuring the Device
[BUTTON FUNC] → (3) Configuring the Button
[MOVEMENT] → (4) Configuring the Movement
[MODE] → (5) Setting MODE Function
[UTILITY] → (6) Configuring Other Functions
[MAINTENANCE] → (7) Maintenance
Chapter 3
Individual Operations
Camera Control top screen
Installation Information
Connection Information
Functions
MICROSCOPE CONTROL Top Screen
[▼] button
Using [M. SETUP] button to navigate to
[MICROSCOPE SETUP MENU] screen
MICROSCOPE SETUP MENU screen
Selecting a Setup Menu
DS-L3 screen
The content of the DS-L3 screen will differ
depending on the configuration and settings of
your microscope.
Buttons of unavailable function are grayed out
and cannot be used.
87