Nikon Eclipse Ni-E Instruction Manual page 12

CAUTION
9 Cautions on assembling and installing the
product
● Take care to avoid pinching your fingers or
hands during product assembly and
installation.
● Scratches or fouling optical components (such
as lens and filters) with fingerprints, etc. will
degrade microscope images. Be careful to
avoid scratches or direct contact with the lens
and filters when assembling.
● The main body weighs approximately 11 kg.
This product is not designed to be portable.
When moving the microscope (i.e. to another
room within the facility), work in a team of at
least two persons, and firmly hold the base of
the product.
● Remove all attachments (if mounted) from the
microscope before moving the microscope.
● Do not place this product in a locker or cabinet.
10 Cautions on sustained observations
To relieve fatigue resulting from long observation
sessions, limit continuous observations to one
hour. Take at least 10 to 15 minutes breaks
between observation sessions. Adjust the layout
of other equipment used and the height of your
chair.
11 Cautions on use, transportation, and
storage
This product must be operated, transported, or
stored in accordance with the following conditions.
Installing this product in a hot, humid location may
result in the formation of mold or condensation on
lenses, impairing performance or causing
malfunctions.
● Operating conditions:
temperature: 0 to +40°C, humidity: 60% RH
max. (no condensation)
● Transporting/storage conditions:
temperature: -20 to +60°C, humidity: 90% RH
max. (no condensation)
See Chapter 3 "4 Transportation (Using Fastening
Position Mode Switch)" in the "Assembly/
Maintenance" instruction manual for fastening the
system during its transportation.
12 Cautions on the disposal of the product
To avoid biohazard risks, dispose of this product
as contaminated equipment in accordance with
the standard procedure specified for your facility.
Safety Precautions
x