Upgrading; Outline; Download Mode - Canon iR2200 Service Manual

Hide thumbs Also See for iR2200:

Table of Contents

1 Upgrading

The machine is upgraded either by downloading data from a PC or by replacing its

The following five items are upgraded by downloading from a PC:

BOOT ROM (machine J1009 DIMM ROM)

HD Format (machine HDD; formatting)

Language (machine HDD)

RUI (machine HDD)

System (machine HDD)

DADF-H1 (CPU; Use the downloader PCB) See 1.6 Downloader PCB

Finisher-J1 (CPU; Use the downloader PCB) See 1.6 Downloader PCB

As indicated, the language module may also be downloaded.

The machine may be connected to a network when downloading data from a PC.

For instructions on upgrading by means of replacing the DIMM/ROM, see 1.7 "Upgrad-

ing by Replacing the DIMM/ROM."

The machine provides two types of download modes; although any of the two may be

used to download all files, select with care if you want to format the hard disk (select the

HD Format), as a specific partition must be selected.

You can use any of the two when using a parallel cable; however, the use of a network

cable will require you to start up the machine's network environment, necessitating the use

of downloading in service mode.

• Downloading in Download Mode

To start download mode,

1) While holding down '2' and '8' on the keypad at the same time, turn on the power

2) Hold down '2' and '8' on the keypad until the bottom of the touch panel indicates the

message "Download Mode."

Partition Available for Formatting the Hard Disk

2000 2000 2000 2000

CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001

CHAPTER 7 UPGRADING

Table of Contents

Ir2800 Ir3300