Canon iR2200 Service Manual page 607

Hide thumbs Also See for iR2200:
Table of Contents

Advertisement

MF-A4
Use it to enter the paper width basic value for the multifeeder tray (A4).
Range of
0 to 1024
adjustment
<FIXING>
Use it to make fixing-relating adjustments.
If you have cleared the RAM on the DC controller PCB and replaced the PCB, be sure to
enter the settings indicated on the service label.
FX-FL-TH
Use it to enter the fine-adjusted value for the fixing film speed for thick pa-
per.
• Use it to make fine-adjustments in relation to the target control speed of
the fixing film when thick paper is selected.
Range of
-3 to +3 (in msec; default: 0)
adjustment
FX-FL-SP
Use it to enter the fine adjustment value for the fixing film when plain pa-
per is selected.
• Use it to fine-adjust the target control speed for the fixing film when
plain paper is selected.
Range of
-3 to +3 (in msec; default: 0)
adjustment
COPYRIGHT © 2001 CANON INC.
2000 2000 2000 2000
CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CHAPTER 5 SERVICE MODE
COPIER>ADJUST>CST-ADJ
COPIER>ADJUST>FIXING
5-55 T

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ir2800Ir3300

Table of Contents