Adjusting The Paper Level Indicator; Adjusting The Position Of The Support Member - Canon iR2200 Service Manual

CHAPTER 3 STANDARDS AND ADJUSTMENTS

5.2 Adjusting the Paper Level Indicator

1) Move the drive belt [2] of the paper
level indicator behind the front cover
[1] by hand so that the white area inside
the window [3] increases, i.e., in the di-
rection for the arrow [4]; move it until a
little resistance is felt.

5.3 Adjusting the Position of the Support Member

If the compartment cannot be opened/
closed smoothly and the position of the sup-
port roller must be adjusted, perform the
following:
1) Remove the front cover.
2) Using the four screws [4] of the roller
support plate [3], make adjustments so
that the support roller [1] and the floor
[2] is about 3 mm when the compart-
ment is fully slid out. (At this time, use
the scale [5] on the front side plate as a
reference.)
3-18 T
COPYRIGHT © 2001 CANON INC.
[1]
[4]
[4]
2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
F03-502-01
[3]
[1]
[2]
F03-503-01
[3]
[2]
[5]
[4]
A