Removing The Grip Assembly; Removing The Toner Sensor; Removing The Developing Assembly Upper Cover - Canon iR2200 Service Manual

Hide thumbs Also See for iR2200:
Table of Contents

Advertisement

CHAPTER 4 IMAGE FORMATION SYSTEM

9.5.2 Removing the Grip Assembly

1) Remove the developing assembly.
(p. 4-33P)
2) Remove the screw [1] and free the three
claws [2]; then, detach the grip assem-
bly [3].

9.5.3 Removing the Toner Sensor

1) Remove the grip assembly. (item 9.5.2)
2) Remove the two screws [1], and discon-
nect the connector [2].
3) Remove the toner sensor [3].

9.5.4 Removing the Developing Assembly Upper Cover

1) Remove the grip assembly. (item 9.5.2)
2) Remove the two screws [1], and free the
three claws [2].
3) Remove the developing assembly upper
cover [3].
4-34 P
COPYRIGHT © 2001 CANON INC.
[3]
[1]
[3]
[1]
2000 2000 2000 2000
CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
[2]
F04-905-02
[2]
[1]
F04-905-03
[2]
F04-905-04
[3]

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ir2800Ir3300

Table of Contents