Upgrading Overview - Canon iR C2880 Series Service Manual

Chapter 18

18.1.2 Upgrading Overview

iR C3380i / iR C3380 / iR C2880i / iR C2880 / iR C3580 / iR C3580i / iR C3080i
The software for the copier and the accessories can be upgraded by the following procedures.
- By download from the personal computer (hereafter PC) in which the service support tool (hereafter SST) is installed.
- By download from the USB memory.
- By changing ROM-DIMM (Boot, G3FAX, G4FAX* only).
Machine SST display
Product
name
Host Machine iRC3380_V3 SYSTEM
iRCXXXX
Accessory FIN_Z3C
FIN_Y
* only 100V machine
18-2
Upgrading tool
System software SST USB
name Memory
yes yes
LANGUAGE yes yes
RUI yes yes
BOOT yes yes
MEAPCONT yes yes
TTS yes yes
ASR yes yes
BROWSER yes yes
DCON yes yes
RCON yes yes
TSTAMP * yes yes
HELP yes yes
WebDAV yes yes
G3FAX yes yes
G4FAX * yes yes
SDICT yes yes
KEY yes yes
FIN_CON yes -
FIN_CON yes -
T-18-2
Remarks
ROM-
DIMM
Change
-
-
-
yes
-
- Using at the expansion of the Voice Guidance Kit (accessory)
- Using at the expansion of the Voice Operation Kit (accessory)
- Using at the expansion of the Web Browser Expansion Kit
(accessory)
-
-
- Using at the expansion of the Time Stamp PDF Expansion Kit
(accessory*)
-
-
yes Using at the expansion of the Super G3 Multi-Line Fax Board-J1
(accessory).
yes Using at the expansion of the G4 FAX Board-E1 (accessory*)
- Using at the expansion of the Searchable PDF Kit (accessory)
-
- Using at the expansion of the Finisher-Z1 (accessory).
A special service tool (Downloader PCB: FY9-2034) is needed.
- Using at the expansion of the Finisher-Y1 and the Saddle Finisher-
Y2 (accessories).
A special service tool (Downloader PCB: FY9-2034) is needed.
0013-9794