Sliding Out The Compartment; Removing The Rear Cover - Canon iR2200 Service Manual

CHAPTER 8 PAPER DECK-L1
Moving the Deck Lifter
1) Sliding out the compartment. (p. 8-17P)
2) If paper is found, remove all of it.
3) Connect the power plug, and turn on the
power switch of the host machine.
4) Push the flag [2] of the paper supply
position sensor found inside the com-
partment so that the deck lifter will
move down. (The deck lifter will stop
where you release the sensor flag.)
5) Disconnect the power plug.

3.1.3 Removing the Rear Cover

1) Release the deck from its host machine;
then, remove the six crews [1], and de-
tach the rear cover [2].
8-20 P
COPYRIGHT © 2001 CANON INC.
F08-301-06-B
[1]
[2]
[1]
2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
[1]
[2]
F08-301-07
[1]