Canon iR2200 Service Manual page 601

<DEVELOP>
Use it to adjust the developing bias output.
DE-DC
Use it to enter the adjustment value for the DC component of the develop-
ing bias within the image area.
Range of 0 to 255 (a higher setting generates lighter images)
adjustment
Caution If you have replaced the DC controller PCB, be sure to enter the settings
indicated on the service label.
DE-OFST
Use it to enter the offset value for the DC component of the developing
bias.
Range of 0 to 255 (a higher setting generates lighter images)
adjustment
Caution • be sure to keep the setting between +30 and -30.
• If you have replaced the composite power supply PCB, be sure to enter
the settings indicated on the label attached to the new PCB (case).
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CHAPTER 5 SERVICE MODE
COPIER>ADJUST>DEVELOP
5-49 T