Canon iR2200 Service Manual page 681

E606
0001 A mounting fault of the HDD is detected when the HDD is started up from
the BOOT ROM.
Main cause The HDD is faulty. The main controller PCB is faulty.
Making Corrections
1. Wiring
Are the connection and cable normal between the connector J1025 on the
main controller PCB and the connector J2005 of the HDD?
NO:
2. System software
Try re-installing the system software. Is the problem corrected?
YES: End.
3. HDD, Main controller PCB
Try replacing the HDD and downloading the system software. Is the prob-
lem corrected?
YES: End.
NO:
E674
0000 A faulty occurs in the communication between the fax PCB and the main
controller PCB.
Main cause The wiring is faulty (short circuit, open circuit). The fax PCB is faulty. The
main controller PCB is faulty.
Making Corrections
1. Wiring
Are the connection and the cable between the connector J 1005 on the main
controller PCB and the connector J31 on the FAX PCB normal?
NO:
2. FAX PCB, Main controller PCB
Try replacing the FAX PCB. Is the problem corrected?
YES: End.
NO:
COPYRIGHT © 2001 CANON INC.
Correct the connection and the cable.
Replace the main controller PCB.
Correct the connection and the cable.
Replace the main controller PCB.
2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CHAPTER 6 SELF DIAGNOSIS
6-23 T