Removing The Multifeeder; Cover - Canon iR2200 Service Manual

CHAPTER 5 PICK-UP/FEEDING SYSTEM
9.2 Multifeeder Tray Assembly
9.2.1 Removing the Multifeeder Tray Assembly
1) Open the multifeeder tray [1], and re-
move the following: delivery tray (2
screws), right front cover (2 screws),
right rear cover (5 screws), right inside
cover (2 screws).
2) Disconnect the connector [2].
3) Close the multifeeder tray [1], and open
the pickup cover [2]; then, detach the
member [3] on the left and the right. (At
this time, the multifeeder tray is not
locked in place; work while supporting
it with your hand.)
4) Open the multifeeder tray once again,
and detach it to the right.
5-44 P
COPYRIGHT © 2001 CANON INC.
[1]
[3]
2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
[1]
F05-902-01
[3]
[2]
F05-902-02
[2]
[3]