Canon iR2200 Service Manual page 620

Hide thumbs Also See for iR2200:

Table of Contents

CHAPTER 5 SERVICE MODE

Use it to execute automatic density correction for text mode (to read PD-

DENS output).

Using the Mode

1) While keeping the following in mind, place the PD-DENS output on the

copyboard glass as indicated:

• The printed side must face down.

• The whiter side (lighter; of the 17 gradations) must face the vertical size

• The output must be placed in relation to the index in the left rear of the

copyboard glass.

2) Select <PD-ME> to highlight, and press the OK key.

3) The scanning lamp goes ON and OFF 13 times, making as many scans

automatically.

• If 'OK' is indicated, end the work.

• If 'NG' is indicated, discussed under "Standards and Adjustments" in

COPIER>FUNCTION>DENS

PD-DENS output

2000 2000 2000 2000

CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001

Place it so that

the printed side

Chapters

Table of Contents

Ir2800 Ir3300