Canon iR2200 Service Manual page 357

6) Remove the front cover of the deck. (p.
8-18P)
7) Remove the four screws [1], and detach
the roller support plate [2].
8) Remove the coupling shaft [1] and the
E-ring [2]; then, detach the pulley cover
[3].
9) Remove the two screws [4], and detach
the cable fixing plate [5] on the left;
then, detach the lifter cable [6] on the
outside.
10) Remove the two screws [7] and the
cable fixing plate [8] on the right side;
then, detach the lifter cable [9] from the
inside.
11) To remove the lifter cable from the pul-
ley [10] on the inside, remove the two
set screws [12] of the pulley [11] on the
outside, and detach the pulley on the
outside.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CHAPTER 8 PAPER DECK-L1
[1]
[2]
F08-303-06
[12]
[10]
[4] [5]
[11]
F08-303-07
[1]
[6]
[9]
[8] [7]
[3]
[2]
[1]
8-33 P