Version; Overview Of Upgrading; Firmware Configuration - Canon D1300 Series Service Manual

Version Up

Overview of Upgrading

There are two kinds of following version up methods in this machine
• Change it for the PCB of a new version
• Upgrading is performed by downloading firmware from a personal computer (hereinafter
called PC) to this machine using a user support tool (hereinafter called UST).
PCB
Main controller PCB • PCB replacing
• UST
Engin controller PCB
6
Trouble Shooting > Version Up > Firmware Configuration
Upgrading method
6 Trouble Shooting > Version Up > Firmware Configuration

Firmware Configuration

T-6-4
Firmware
BOOTABLE Overall control
LANGUAGE Manage languages used in panel / Remote UI and font data. Main controller PCB
DCON Control the printer unit.
(ECONT)
A number of firmware may be less than the above depending on the UST version.
Caution:
When you install it every model in this machine so that firmware is different, you must
not make a mistake
BOOTABLE/LANGUAGE
DCON
Firmware
USB cable
Function
Main controller PCB
Engine controller PCB
MF6700/D1300 MF5900/MF6100/MF6700/D1300
(SEND Model)
typeA typeB
Model is common
6-6
PC
F-6-3
Storage area
T-6-5
T-6-6
6-6