Canon iR2200 Service Manual page 176

CHAPTER 3 LASER EXPOSURE SYSTEM
5 Disassembly and Assembly
The discussions that follow cover the machine's mechanical characteristics and how to
disassemble/assemble the machine. Keep the following in mind whenever you work with the
machine:
1. The power plug must remain disconnected for safety when disassembling/assembling
the machine.
2. Unless otherwise noted, the machine may be assembled by reversing the steps used to
disassemble it.
3. The screws must be identified by type (length, diameter) and location.
4. The mounting screws used for the grounding wire and the varistors come with a washer,
which must not be left out when assembling the machine.
5. As a rule, the machine must not be operated with any of its parts removed.
6. Leakage of laser light must be avoided, as it can adversely affect the human body. Do
not disassemble parts not discussed herein or remove any paint-locked screws.
3-8 P
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001