Canon iR2200 Service Manual page 684

CHAPTER 6 SELF DIAGNOSIS
E711
0001 Data is written to the error register of the communication IC (IPC) on the
reader controller PCB four times or more within 1.5 sec.
0002 Data is written to the error register of the communication IC (IPC) on the
DC controller PCB four times or more within 2 sec.
0003 Data is written to the error register of the communication IC (IPC) on the
main controller PCB four times or more within 2 sec.
Main cause The connector has poor connection. The ADF controller PCB is faulty. The
finisher controller PCB is faulty. The DA unit PCB is faulty. The card
reader PCB is faulty.
Action
a. E711-0001
Connector, ADF controller PCB
Is the interface cable between the ADF controller PCB an the reader con-
troller PCB normal?
NO:
YES: Replace the ADF controller PCB.
b. E711-0002
connector, Finisher controller PCB
Is the interface cable between the finisher controller PCB and the DC con-
troller PCB normal?
NO:
YES: Replace the finisher controller PCB.
c. E711-0003
Connector, DA unit PCB
Is the interface cable between the DA unit PCB and the main controller
PCB normal?
NO:
YES: Replace the NE controller PCB.
6-26 T
COPYRIGHT © 2001 CANON INC.
Correct the cable.
Correct the cable.
Correct the cable.
2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001