Canon iR2200 Service Manual page 633

<SYSTEM>
Use it to check system-related operations.
DOWNLOAD
Use it to switch to system program download mode.
Caution • Use it to download the system program.
Using the Mode
1) Turn off the machine and the PC.
2) Disconnect the network cable from the machine.
3) Connect the machine and the PC with a bi-Centronics cable.
4) Turn on the PC.
5) Turn on the machine.
6) Select <DOWNLOAD> to highlight, and press the OK key.
7) Use the Service Support Tool to download the data.
8) When done, turn off and then on the main power switch.
CHK-TYPE
Use it to select a partition number for HD-CHECK.
Using the Mode
1) Selects the item.
2) Selects a partition number using the keypad (0: check and recover entire
HDD for faulty sectors, 1: image storage area, 2: general file storage area,
3: PDL-related file storage area, 4: firmware storage area).
• A general file refers to the following: user settings data, log data, PDL
spool data, image data.
3) Press the OK key.
HD-CHECK
Use it to execute a check and recovery of the partition selection using CHK-
TYPE.
Using the Mode
1) Select the item.
2) Press the OK key.
3) The machine indicates the result (1: OK, 2: NG (hardware), 3: NG (soft-
ware); recovery sensor/alternate sector).
HD-CLEAR
Use it to initialize the partition selected using CHK-TYPE.
Caution • If '0' or '4' is selected, the executing will be invalid.
• If' '1' is selected, the image control data stored in the SRAM area or the
general file storage area will also be initialized.
Using the Mode
1) Select the item.
2) Press the OK key.
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CHAPTER 5 SERVICE MODE
COPIER>FUNCTION>SYSTEM
5-81 T