Connection - Canon iR2200 Service Manual

Hide thumbs Also See for iR2200:

Table of Contents

1.4.2 Connection

The following discussions assume the use of a network cable (cross cable).

Making Preparations

If you want to download firmware to the machine using a network, you need to set up the

PC and the machine's network environment.

Use TCP/IP as the communication protocol for downloading form a network using the

Service Support Tool. Connect the PC to the machine by way of the network, and check to

make sure that all are ready for communication by sending a PING command from the PC

or the machine.

1) Connect the machine's network connector (RJ-45) and the network connector of the PC

using a network cable (cross cable).

2) Turn on the PC, and start up the Service Support Tool.

3) Connect the machine's power plug to the power outlet, and start service mode; make the

following selections: COPIER>FUNCTION>SYSTEM>DOWNLOAD. Then, click

'OK' so that the machine will be in download standby mode (notation "STNDBY").

1.4.3 Preparing BOOT ROM

The discussions that follow assume upgrading an iR8500 (COPY model).

1) User 'Downloading/Uploading', select 'To Next'.

2000 2000 2000 2000

CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001

CHAPTER 7 UPGRADING

Table of Contents

Ir2800 Ir3300