Canon iR2200 Service Manual page 366

CHAPTER 8 PAPER DECK-L1
3.5 Electrical Mechanisms
3.5.1 Removing the Deck Drive PCB
1) Remove the rear cover. (p. 8-20P)
2) Disconnect the seven connectors [1],
and remove the four screws [2]; then,
detach the deck driver PCB [3].
3.5.2 Removing the Open Switch PCB
1) Remove the front upper cover.
(p. 8-21P)
2) Remove the two screws [2] from behind
the front upper cover [1], and detach the
open switch PCB [3].
8-42 P
COPYRIGHT © 2001 CANON INC.
[2]
[1]
[2]
[1]
2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
[3]
F08-305-01
[3]
F08-305-02
[2]
[2]
[2]