Canon iR2200 Service Manual page 609

DK-ADJ-Y
Use it to enter the horizontal registration adjustment value for the paper
deck.
• Use it to enter a laser write position value in relation to the registered
value for paper picked up from the paper deck.
Range of -32 to +32 (in steps; 1 step being 0.16 mm)
adjustment
FRAME-X
Use it to enter a zoom fine-adjustment value (sub scanning direction).
• Use it to enter an extra length of the image in sub scanning direction in
relation to the registered value.
Range of -50 to +50 (-1% to +1%)
adjustment
FRAME-Y
Use it to enter the zoom fine-adjustment value (main scanning direction).
• Use it to enter an extra length for the image in main scanning direction
in relation to the register value.
Range of -50 to +50 (-1% to +1%)
adjustment
IMG-DLY
Use it to enter a fine-adjustment value (sub scanning direction) for image
delay.
• Use it to make fine adjustments for the length of image delay in sub
scanning direction when sending image data from the main controller PCB
to the DC controller PCB.
Range of -20 to +20 (in 0.1 mm)
adjustment
COPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
CHAPTER 5 SERVICE MODE
COPIER>ADJUST>MISC
5-57 T