Canon iR2200 Service Manual page 270

CHAPTER 5 PICK-UP/FEEDING SYSTEM
9.2.4 Removing the Separation Pad
1) Remove the multifeeder tray pickup
roller. (p. 5-45P)
2) While butting the end [1] of the pickup
cover in the direction of A, pull the rear
of the separation pad over [2] in the di-
rection of B to detach.
3) While holding down the multifeeder in-
termediate retaining plate [1] so that it
will not open, remove the lever claw as-
sembly [2] and detach the lever [3].
4) Open the multifeeder intermediate re-
taining plate [2] so that the two springs
[1] will not spring out.
5) Remove the two springs [1].
6) While pushing the end [3] of the pickup
cover in the direction of A, pull the
multifeeder intermediate retaining plate
[2] in the direction of B to detach.
7) Remove the separation pad [4].
5-46 P
COPYRIGHT © 2001 CANON INC.
[1]
[1]
[4]
2000 2000 2000 2000 CANON iR2200/iR2800/iR3300 REV.0 MAR. 2001
[2]
F05-902-05
[3]
[2]
F05-902-06
[1]
B
[2]
F05-902-07
A
B
[1]
A
[3]