Tech.rep.mode; Tech.rep.mode Menu Function Tree - Konica Minolta 7115 Service Manual

3.

TECH.REP.MODE

• This mode allows the Tech. Rep. to set adjust, and/program various service functions.
3-1.

Tech.Rep.Mode Menu Function Tree

---0: Control Panel LED Check
---1: Function "F- "
---: Tech.Rep.Mode ---2: Tech.Rep.Choice "c--"
---3: Counter "cnt"
---4: ATDC Sensor Output
---5: Level History
---6: ROM Version Display
---7: Administrator No. Input
~
F-1 : Paper Passage Test
F-2 : HV Output
F-8 : ATDC Sensor Automatic Adjustment
F12: Test Pattern Output
c-1 : Maintenance Counter Count
c-2 : IU Life Stop
c-3 : ID Adjustment
c-4 : VG Adjustment
c-5 : Leading Edge Erase Adjustment
c-6 : Trailing Edge Erase Adjustment
c-7 : Top/Bottom Edge Erase Adjustment
c-8 : Loop Length Adjustment (1st Tray)
c-9 : Loop Length Adjustment (2nd Tray)
c10: Loop Length Adjustment (Bypass Tray)
c11: Priority FLS Setting
--1: PM Counter
--2: Maintenance Counter
--3: IU Life Counter
--4: Application Counter
--5: Jam Counter
--6: Trouble Counter
--7: Paper Size Counter
Vg (grid voltage)
Vb (developing bias voltage)
S-13