Toner Supply; Memory Rx On/Off; Pop3 Rx - Konica Minolta bizhub 200 Service Manual

8. Utility/Counter Mode
8.4.7

Toner Supply

• To adjust the set toner-to-carrier level by providing an auxiliary supply of toner when a
Functions low image density occurs due to a lowered toner-to-carrier ratio after large numbers of
copies have been made of originals having a high image density.
Use • To replenish the supply of toner in an auxiliary manner.
• Touch [Toner Supply] for the copier to detect the current toner density and, if the den-
Setting/ sity is lower than the standard value, a toner-replenishing sequence, then a developer
Procedure agitation sequence are performed. If the toner density is detected to be higher than the
standard value, only a developer agitation sequence is performed.
8.4.8

Memory RX ON/OFF

2
See P.17 of the FK-503 service manual.
8.4.9

POP3 RX

2
See P.17 of the FK-503 service manual.
126
Confidential – for internal use only, do not distribute
Field Service Ver. 2.5 Jul. 2006