Utility mode
11.3
Specifying User Management settings
From the User Management screen, settings for more comfortable use of the
machine can be specified, such as the volume.
The following procedure describes how to display the User Management
screen and specify its settings.
To specify user management settings
1
Press the [Utility/Counter] key.
The Utility/Counter screen appears.
2
Touch [User Management].
The User Management screen ap-
pears.
3
Select a parameter to be set.
4
Specify the desired settings, and then touch [Enter].
–
To cancel changes to the settings, touch [Cancel].
–
To exit the User Management screen, touch [Enter] in each screen
until the Basics screen appears.
250/350
11
11-21