Konica Minolta bizhub C353 Service Manual page 1020

Field Service Ver. 2.0 Jan. 2008
Precaution for in & out guide motor reinstallation
1. Press the two in & out guides [1] in and check that they touch the stopper [2] simulta-
neously.
2. Check that pins [4] can be inserted through the positioning holes [3] (3 holes) of the in
& out guide sensor assy.
3. Use two screws to secure the in & out guide motor.
3.3.8 Crease roller
1. Remove the crease unit.
See P.9
[2]
[3]
[1]
[2]
[1]
[2]
4511F2C565DA
[1]
[4]
2. Remove two springs [1] and four
screws [2], and remove the upper
plate [3].
3. Other
[3]
4511F2C533DA
17