2. Other
[3]
[1]
[1]
30
[1]
[2]
[5]
[4]
A0D6F2C568DA
[2]
[3]
A0D6F2C569DA
[2]
[3]
[1]
A0D6F2C570DA
Field Service Ver. 2.0 Jan. 2008
6. Remove the screw [1] and the
washer [2].
7. Disconnect the connector [3].
8. Remove two screws [4], and remove
the base cover [5].
9. Remove four screws [1], and remove
the Sensor unit (upper) [2] and the
sensor unit (lower) [3].
10. Remove the spring [1].
11. Remove the punch unit [2] from the
side registration motor section [3].