Konica Minolta bizhub C353 Service Manual page 1032

Field Service Ver. 2.0 Jan. 2008
6.2 Finisher Check modes
A. Fold Drive
1
• Performs the creasing drive once.
→ Raises the layable guide.
→ Stops after the predetermined time.
→ Lowers the layable guide.
→ The operation is finished.
B. Saddle Outlet Open&Close
1
• Opens the saddle exit after the saddle exit is opened and closed.
→ Stops after the predetermined time.
→ The saddle exit closes.
→ The saddle in & out guide advances.
→ Stops after the predetermined time.
→ The saddle in & out guide retracts.
→ The operation is finished.
C. Conveyance Drive
1
• Transport drive is performed for the predetermined time. (Performs the same transport
drive as the pre-drive with the high speed of the connected copier.)
→ Drives the entrance motor (M1).
→ Drives the transport motor/1 (M2).
→ Drives the transport motor/2 (M3).
→ Drives the exit motor (M4).
→ The operation is finished.
• If the mail bin kit MT-502 is installed, the mail bins are also driven.
• If the saddle kit SD-505 is also installed, the saddle transport motor (M8) is also driven.
6. Finisher operations
29
1