Subaru 2009 IMPREZA Service Manual page 3289

CRUISE CONTROL SYSTEM (DIAGNOSTICS)
2. General Description
A: CAUTION
Airbag system wiring harness is routed near the cruise control command switch.
CAUTION:
• Airbag system wiring harnesses and connectors are yellow. Do not use electrical test equipment
on these circuits.
• Be careful not to damage the airbag system wiring harness when servicing the cruise control com-
mand switch. Airbag system wiring harness is routed near the cruise control command switch.
B: PREPARATION TOOL
1. SPECIAL TOOL
ILLUSTRATION
ST1B022XU0
2. GENERAL TOOL
TOOL NAME
Circuit tester
C: INSPECTION
Measure the battery voltage and specific gravity of electrolyte.
Standard voltage:
12 V or more
Specific gravity:
1.260 or more
General Description
TOOL NUMBER DESCRIPTION
1B022XU0 SUBARU SELECT
MONITOR III KIT
CC(diag)-4
Used for troubleshooting the electrical system.
REMARKS
Used for measuring resistance, voltage and current.
REMARKS