Subaru 2009 IMPREZA Service Manual page 3220

Hide thumbs Also See for 2009 IMPREZA:

EXTERIOR/INTERIOR TRIM

Be careful with the wiring harness routing dur-

ing installation. When installing to the vehicle

body, pinching the wiring harness may cause

open circuits and shorts.

Attach each part in the reverse order of disassem-

bly, until the instrument panel assembly is formed.

Method of installing insulator

Use polyurethane adhesive. When assembling the

instrument panel assembly, wait until the adhesive

has evaporated to prevent filling of the smell in the

compartment.

• Double-sided tape

Use commercial double-sided tape. (Use strong

double-sided adhesive tape.)

Tightening torque:

Instrument panel lower:

7.5 N·m (0.76 kgf-m, 5.5 ft-lb)

Passenger's airbag module:

7.5 N·m (0.76 kgf-m, 5.5 ft-lb)

Instrument Panel Assembly