Subaru 2009 IMPREZA Service Manual page 3256

Hide thumbs Also See for 2009 IMPREZA:

EXTERIOR BODY PANELS

C: ADJUSTMENT

1) Adjust the clearance between front hood panel

and front fender panel. Clearance must be equal at

both sides. For the dimension of clearance, refer to

"SPECIFICATION" in "General Description". <Ref.

to EB-2, SPECIFICATION, General Description.>

2) Use the hinge mounting bolts to align the front

hood longitudinal and lateral position.

3) Adjust the height at the front end of hood. <Ref.

to SL-41, ADJUSTMENT, Front Hood Lock Assem-

4) Rotate the hood buffer to adjust lateral height.

For the disposal procedures of front hood damper

stay, refer to the disposal procedures of rear gate

damper stay. <Ref. to EB-33, REAR GATE DAMP-

ER STAY, DISPOSAL, Rear Gate.>