Subaru 2009 IMPREZA Service Manual page 3267

EXTERIOR BODY PANELS
2) Apply tape from the front of the vehicle towards
the rear.
NOTE:
Apply the tape end at a position within 2.5 1.5 mm
(0.1 0.06 in) from the front door rear sash line.
B-B
(1)
B-B
(1) Front door sash tape - front
(2) Front door rear sash line
3) Cut off both ends of the front door sash tape —
rear.
4) Match the sash corner and the cut area of the
tape as shown in the figure. (Position of the arrow)
Door Sash Tape
5) The lower end of the tape is to be aligned so that
a space of approximately 3.7 mm (0.15 in) remains,
so that the attachment holes of the weather strip
outer are not blocked. (Position of the arrow)
EB-00405
(2)
EB-00402
6) Apply tape from the top of the vehicle towards
the bottom.
7) Fold the corners at the door upper end area in
EB-00403
the order of (1) - (3).
8) Thereafter, install door parts in the reverse order
of disassembly.
EB-28
C-C
(1)
3.7 mm
(1) Front door sash tape — rear
C-C
EB-00404
EB-00406
(2)
(1)
(3)
EB-00408