Adjusting The Lens; Focus; Zoom; Shift - Digital Projection TITAN sx+ 3D Dual 3D Ultra Contrast User Manual

Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast

Adjusting the lens

Focus

• Press followed by
When adjustment is finished, press

Zoom

• Press followed by
When adjustment is finished, press

Shift

• Press followed by
right.
When adjustment is finished, press
Rev A August 2009
and to adjust the focus.
.
and to adjust the zoom.
.
, , or to shift the lens up, down, left or
.
User Manual 3. Getting Started
Notes
Each time a new lens is
fitted to the projector,
the calibration procedure
must be carried out. See
Setup menu, in Section 4.
Controlling the projector.
For more detailed information
about:
- using the control keys on the
remote control or keypad,
- using the menus,
see the next section:
Controlling the projector.
When any of the three Lens
adjustment keys is pressed, the
blue Transmit indicator on the
remote control will light for 10
seconds:
- after 10 seconds, if no
adjustment has been made,
the indicator will go out and
the Lens adjustment key must
be pressed again to resume
adjustment.
- to end the adjustment before
10 seconds has elapsed, press
the key.
- all other adjustments will
be locked out until the Lens
adjustment is ended.
Page 3.3