Table of Contents
Advertisement
Digital Projection E-Vision Laser WQ120 Series
Adjusting the lens
The lens can be adjusted using the
Lens
Lens menu
The
menu provides access to the
Lens
allows
,
and
Lens Control
Zoom
Focus
mode.
Shift Adjustment
Press
to switch between the two modes.
ENTER/SELECT
Remote control
Use the remote control to adjust zoom, focus and shift directly, without opening a menu:
•
enters lens control, then switches between
OK
•
exits lens control and opens the
EXIT
•
MENU
exits lens control and returns to the main image.
•
The arrow buttons adjust zoom, focus and shift as indicated on the screen.
Adjusting the image
Orientation
•
This can be set from the Setup menu.
Highlight
and choose from
Orientation
Geometry
•
Settings such as Aspect Ratio and Overscan can be set from the Geometry menu.
Picture
•
Settings such as Gamma, Brightness
Installation and Quick-Start Guide
menu, or using the lens buttons on the remote control.
setting and the
Lens Control
Lens Center
adjustment using the arrow buttons. The setting operates in
Shift
Zoom/Focus Adjustment
menu.
Lens
,
,
Front Tabletop
Front Ceiling
Contrast
,
Saturation
,
Hue and Sharpness can be set from the Image menu.
,
OPERATING THE PROJECTOR
command.
Zoom/Focus Adjustment
and
.
Shift Adjustment
and
Rear Tabletop, Rear Ceiling
Auto-front
and
For full details of how to adjust
the lens using the remote control,
see
Remote Control
guide.
.
Notes
earlier in this
Rev A May 2018
page 17
Advertisement
Table of Contents
