Refresh; Connect - Digital Projection TITAN sx+ 3D Dual 3D Ultra Contrast User Manual

For important information about how to control the projector when Input 8 is being used, see the final pages of Section 4.
5. Userware 5. Userware

Refresh

• Click on Refresh to search the network for other projectors.
Any projectors previously connected, that are now no longer online, will be
marked Unreachable.

Connect

• Click on the LAN IP address to connect to a projector in the list.
Page 5.26 Page 5.26
Digital Projection Digital Projection
TITAN sx+ 3D, Dual 3D, Ultra Contrast TITAN sx+ 3D, Dual 3D, Ultra Contrast
User Manual User Manual
Notes
The Discover page is available
only on the Standalone version
of the Userware..
The Userware can be used to
control only one projector at a
time, and only one instance can
be running at one time.
The Discover page can be
used to switch control between
multiple projectors.
More than one computer can be
used to control more than one
projector on the same network.
Rev A August 2009 Rev A August 2009