Adjusting The Lens; Zoom; Focus; Shift - Digital Projection Titan Pro Series III User Manual

Digital Projection
Titan Pro series III

Adjusting the Lens

•
The lens can be adjusted using the

Zoom

•
Press followed by and
•
When the adjustment is finished, press

Focus

•
Press followed by and
•
When the adjustment is finished, press

Shift

•
Press followed by ,
•
When the adjustment is finished, press

Adjusting the Image

Orientation

•
This can be set from the Projector Menu

Control settings

•
Settings for the On-Screen Display

Keystone

•
This can be set from the
Advanced Geometry Menu
.
Menu

Picture

•
Settings such as and
Brightness
from the Input Settings Menu .
•
You can also set ,
Brightness Contrast
control.
Rev A May 2012
Lens Menu , which is available from the
to adjust the size of the image on the screen.
.
to adjust the focus.
.
, and to adjust the position of the image on the screen.
.
, which is available from the Global Settings Menu
and Network can be set from the
, which is available from the
can be set from the
Contrast Picture Menu
or by pressing
Saturation
OPERATING THE PROJECTOR
Global Settings Menu , or:
.
Global Settings Menu .
Global Settings
, which is available
, or on the remote
Installation and Quick-Start Guide
Notes
When any of the three Lens
adjustment keys is pressed, the blue
Transmit indicator on the remote
control will light for 10 seconds:
- after 10 seconds, if no adjustment
has been made, the indicator will
go out and the Lens adjustment key
must be pressed again to resume
adjustment.
- to end the adjustment before 10
seconds has elapsed, press the
key.
- all other adjustments will be locked
out until the Lens adjustment is
ended.
Main Menu
Global Settings
For full details of how to use the
controls and the menu system, see
the Operating Guide.
Main Menu
Input Settings
Page Inst_10