Adjusting The Lens; Adjusting The Image - Digital Projection M-Vision Laser 21000 WU Important Information Manual

Important Information

Adjusting the lens

The lens can be adjusted using the
Lens menu
The menu provides access to the
Lens
allows
Lens Control
operates in
Zoom/Focus Adjustment
Press ENTER/SELECT to switch between the two modes.
Remote control
Use the remote control to adjust zoom, focus and shift directly, without opening a menu:
•
enters lens control, then switches between
OK
•
exits lens control and opens the
EXIT
•
exits lens control and returns to the main image.
MENU
•
The arrow buttons adjust zoom, focus and shift as indicated on the screen.

Adjusting the image

Orientation
•
This can be set from the
Choose from
Front Tabletop
Keystone
•
This can be set from the
Picture
•
Settings such as
from the
Image
Page 20
Lens
Lens Control
, and
Zoom Focus Shift
and
menu.
Setup
,
Front Ceiling
Geometry
,
Gamma Brightness, Contrast
menu.
Digital Projection M-Vision Laser 21000 WU
menu, or using the lens buttons on the remote control.
setting and the
adjustment using the arrow buttons. The setting
Shift Adjustment
Zoom/Focus Adjustment
menu.
Lens
,
Rear Tabletop
menu.
,
Saturation
Center Lens
mode.
and
, and
Rear Ceiling
, and
Hue Sharpness
Rev A November 2018
command.
.
Shift Adjustment
.
Auto-front
can be set